Chorus/Delay parts

A family of high-end analog DI and effects gear.
dreamevil
Posts: 31
Joined: Mon Nov 16, 2015 7:11 pm

Chorus/Delay parts

Post by dreamevil » Fri Sep 20, 2019 7:43 pm

Hi everyone. The next refurb will be the Rockman Chorus/Delay. Can anyone knows the exact caps of the Chorus/Delay unit?
Thanks.

X100Ver10
Posts: 109
Joined: Mon Sep 18, 2017 2:49 pm

Re: Chorus/Delay parts

Post by X100Ver10 » Sat Sep 21, 2019 2:52 am

13 total caps:

2 - 1000uf 25v
1 - 220uf 16v
1 - 22uf 16v
9 - 10uf 35v

dreamevil
Posts: 31
Joined: Mon Nov 16, 2015 7:11 pm

Re: Chorus/Delay parts

Post by dreamevil » Sat Sep 21, 2019 9:18 am

THank You!

dreamevil
Posts: 31
Joined: Mon Nov 16, 2015 7:11 pm

Re: Chorus/Delay parts

Post by dreamevil » Fri Oct 11, 2019 12:25 am

Image

The other blue caps are 35V 10uf right ?

I'll change all the caps with audio grade high quality ones. Does it matter putting audio grade caps on the 25V 1000uf'?

X100Ver10
Posts: 109
Joined: Mon Sep 18, 2017 2:49 pm

Re: Chorus/Delay parts

Post by X100Ver10 » Fri Oct 11, 2019 1:01 am

dreamevil wrote:
Fri Oct 11, 2019 12:25 am
Image

The other blue caps are 35V 10uf right ?

I'll change all the caps with audio grade high quality ones. Does it matter putting audio grade caps on the 25V 1000uf'?
Yes, those other 9 are 10uf. I replace them with audio grade 10uf 50V but 35V is usually what is in there and will work fine. I just stopped buying 10uf 35v because other later models have some 50v and I didn't see a need to have both. The price difference was minimal too.

I don't use the audio grade for the power 1000uf 25v caps. I doubt audio grade would make any difference for those 2 caps.

dreamevil
Posts: 31
Joined: Mon Nov 16, 2015 7:11 pm

Re: Chorus/Delay parts

Post by dreamevil » Fri Oct 11, 2019 11:49 am

X100Ver10 wrote:
Fri Oct 11, 2019 1:01 am
dreamevil wrote:
Fri Oct 11, 2019 12:25 am
Image

The other blue caps are 35V 10uf right ?

I'll change all the caps with audio grade high quality ones. Does it matter putting audio grade caps on the 25V 1000uf'?
Yes, those other 9 are 10uf. I replace them with audio grade 10uf 50V but 35V is usually what is in there and will work fine. I just stopped buying 10uf 35v because other later models have some 50v and I didn't see a need to have both. The price difference was minimal too.

I don't use the audio grade for the power 1000uf 25v caps. I doubt audio grade would make any difference for those 2 caps.
You're the best. Did you change the 35v with 50v on your sustainor (100 or 200 don't know) too?

X100Ver10
Posts: 109
Joined: Mon Sep 18, 2017 2:49 pm

Re: Chorus/Delay parts

Post by X100Ver10 » Sat Oct 12, 2019 1:31 am

Any Rockman gear I refurbish now gets a 10uf 50v regardless if it had a 10uf 16v, 10uf 35v, or a 10uf 50v. I ran out of 10uf 35v caps awhile ago and have bought 10uf 50v ever since. As long as you go with a higher voltage than what was in there, you should be fine. Just make sure you stay with the same uf.