Here are a few pictures of a recent acquisition.
I picked up a well-used Bass Rockman pedal, one from SR&D, not the Dunlop reissue.  This thing must have been in somebody’s basement as not only did it smell moldy but there was some corrosion on the headphone jacks.  I figured this would make a fun restoration project.
First thing I did was add an internal power supply so I wouldn't have to use eight AA batteries.  This was purchased from B5amps.com.  Dwight was great to work with and provides a solid working solution over using batteries.  I used some contact cleaner on the switches to enable them to move more freely and cleanly.  Next I realized that the headphone jacks would need to be replaced as they were faulty.  I replaced them and ended up doing a cap job replacing all the electrolytic caps.  It sounds so much better now especially with the new jacks.
These pictures are before replacing the jacks and caps.  I reduced the size so they weren't so large to upload.
			
			
						Early Rockman Bass headphone amp pictures
- 
				darthoverdrive
														 - Posts: 64
 - Joined: Tue Mar 25, 2014 1:39 pm
 - Location: Kansas
 
Early Rockman Bass headphone amp pictures
You do not have the required permissions to view the files attached to this post.