Chorus/Delay parts

[dreamevil]

Hi everyone. The next refurb will be the Rockman Chorus/Delay. Can anyone knows the exact caps of the Chorus/Delay unit?
Thanks.

[X100Ver10]

13 total caps:

2 - 1000uf 25v
1 - 220uf 16v
1 - 22uf 16v
9 - 10uf 35v

[dreamevil]

THank You!

[dreamevil]

The other blue caps are 35V 10uf right ?

I'll change all the caps with audio grade high quality ones. Does it matter putting audio grade caps on the 25V 1000uf'?

[X100Ver10]

The other blue caps are 35V 10uf right ?

I'll change all the caps with audio grade high quality ones. Does it matter putting audio grade caps on the 25V 1000uf'?

Yes, those other 9 are 10uf. I replace them with audio grade 10uf 50V but 35V is usually what is in there and will work fine. I just stopped buying 10uf 35v because other later models have some 50v and I didn't see a need to have both. The price difference was minimal too.

I don't use the audio grade for the power 1000uf 25v caps. I doubt audio grade would make any difference for those 2 caps.

[dreamevil]

The other blue caps are 35V 10uf right ?

I'll change all the caps with audio grade high quality ones. Does it matter putting audio grade caps on the 25V 1000uf'?

Yes, those other 9 are 10uf. I replace them with audio grade 10uf 50V but 35V is usually what is in there and will work fine. I just stopped buying 10uf 35v because other later models have some 50v and I didn't see a need to have both. The price difference was minimal too.

I don't use the audio grade for the power 1000uf 25v caps. I doubt audio grade would make any difference for those 2 caps.

You're the best. Did you change the 35v with 50v on your sustainor (100 or 200 don't know) too?

[X100Ver10]

Any Rockman gear I refurbish now gets a 10uf 50v regardless if it had a 10uf 16v, 10uf 35v, or a 10uf 50v. I ran out of 10uf 35v caps awhile ago and have bought 10uf 50v ever since. As long as you go with a higher voltage than what was in there, you should be fine. Just make sure you stay with the same uf.

[dreamevil]

I bought a replacement psu for chorus/delay Hammond 162E10 (as rockman.fr says the original one is Hobart PSD-310) But i saw a chorus/delay on an auction its different!!